6″ Rigid Handle Cup for Flat or Curved Surfaces – Pack of 4

Description

Wood’s Powr-Grip TL6RH — 6″ Aluminum Offset Rigid Handle Vacuum Cup for Flat and Curved Surfaces (70 lbs / 32 kg) — Pack of 4

The Wood’s Powr-Grip TL6RH is a compact, professional-grade vacuum hand cup engineered for fast, reliable attachment to flat and curved smooth, nonporous surfaces with a rated load capacity of 70 lbs (32 kg). Featuring a 6″ (15 cm) standard rubber suction pad (Model TL6), an aluminum handle, and an industrial-grade plastic plunger, the TL6RH is distinguished by its offset, fixed handle design — a geometry that prevents the load from swinging or changing orientation when lifted, providing significantly greater control over awkward or unbalanced objects than a centered or pivoting handle. Compact enough to fit in a toolbox or large pocket, the TL6RH is the field technician’s everyday carry vacuum cup for jobs requiring a capable, portable, single-cup lifter on flat or curved surfaces. Rated for curved surfaces with a minimum radius of 12″ (305 mm) and operable down to 0°F (-18°C), it performs across a wide range of environments and applications. Sold as a Pack of 4 (SKU: 91320, Model: TL6RH), the kit provides redundant tooling for multi-cup lifts and high-volume operations. Manufactured by Wood’s Powr-Grip.

The offset fixed handle is the defining design feature that sets the TL6RH apart from other 6″ hand cups in the WPG lineup, including the LJ6VH. Where a centered handle positions the operator’s grip directly above the pad — allowing the load to pivot or swing freely — the TL6RH’s offset handle shifts the grip point to control the load’s orientation, preventing rotation and swing during the lift. This is particularly valuable when handling objects that are not symmetrical, have an off-center center of gravity, or must be held at a specific angle during installation. The aluminum handle and compact form factor make it one of the most portable high-capacity single cups in the WPG range.

Key Features & Benefits

Offset, Fixed Handle — Prevents Load Swing and Rotation

The TL6RH’s offset, fixed handle is its most important differentiating feature: the handle geometry is designed to prevent the attached load from swinging or changing orientation when lifted, giving the operator direct control over the load’s angle and position throughout the lift. This is critical when handling objects with an off-center center of gravity, asymmetrical shapes, or materials that must be held at a specific angle during installation — such as angled glass panels, body panels, or curved architectural elements. No other 6″ hand cup in the standard WPG lineup offers this load-stabilizing handle geometry.

Compact and Portable — Toolbox and Pocket Ready

The TL6RH is specifically noted by Wood’s Powr-Grip as being strong enough for most jobs while small enough to fit in a toolbox or large pocket — making it the preferred everyday carry vacuum cup for field technicians, glaziers, auto glass installers, and service professionals who need a capable lifter available at all times without carrying a dedicated case. The pack-of-4 configuration means multiple cups can be stored compactly in a single tool bag or service vehicle compartment.

Aluminum Handle

The aluminum handle provides a lightweight, corrosion-resistant grip suited for repeated use in both shop and field environments, including wet, humid, and cold conditions. Aluminum construction resists rust in environments where moisture, cutting fluid, or outdoor exposure are factors, while maintaining the structural rigidity needed for controlled lifting of loads up to 70 lbs. The lightweight handle reduces operator fatigue during high-repetition handling tasks.

Flat and Curved Surface Compatibility (Min. 12″ Radius)

The TL6RH is rated for both flat and curved smooth, nonporous surfaces, with a minimum curved surface radius of 12″ (305 mm) — matching the LJ6VH and TL6RH2B pair, and covering the majority of curved glass, automotive glass, body panels, and cylindrical objects encountered in glazing and automotive service work. The offset handle provides additional control when attaching to and lifting from curved surfaces where load orientation is harder to maintain with a centered grip.

Extended Low-Temperature Rating (0°F / -18°C)

The TL6RH is rated for operation down to 0°F (-18°C), making it suitable for cold storage facilities, outdoor winter job sites, and refrigerated environments where standard-rated cups (10°F minimum) may experience rubber hardening and reduced seal performance. For field technicians working in northern climates or cold chain environments, this extended cold-temperature rating ensures the cup remains operational year-round.

Red-Line Vacuum Loss Indicator

The built-in red-line indicator provides a continuous visual warning if vacuum pressure drops significantly during a lift, giving the operator an immediate alert before load failure can occur. For a single-operator field cup used across a wide variety of surfaces and conditions, the vacuum indicator is a critical safety check that should be verified before every lift and monitored throughout. Lower the load immediately if the indicator shows vacuum loss.

Vacuum Pad Protector Included — Pack of 4

Each TL6RH ships with a vacuum pad protector to keep the suction pad clean and protected during storage and transport, extending rubber seal life and maintaining consistent vacuum performance between uses. The compact form factor and pad protector make the TL6RH well-suited for tool bag storage and service vehicle carry. The pack-of-4 configuration provides redundant tooling for multi-cup lifts and ensures replacement cups are on hand when a pad requires service.

Common Applications

General Field Glass Handling

Glaziers and glass installers use the TL6RH as an everyday carry cup for handling flat and curved glass panels on job sites where a compact, portable lifter is needed. The offset handle provides load orientation control when positioning glass panels at angles during installation, and the 70 lb capacity covers a wide range of standard glass panel sizes.

Automotive Glass and Body Panel Handling

Auto glass technicians and body shop professionals use the TL6RH for windshield, side glass, and body panel handling where the offset handle’s load-stabilizing geometry prevents panels from swinging or rotating during removal and installation. The 12″ minimum radius rating accommodates most automotive glass curvatures.

Angled and Off-Center Load Handling

When handling objects with an off-center center of gravity — such as asymmetrical glass panels, L-shaped stone pieces, or irregularly shaped architectural elements — the TL6RH’s offset fixed handle prevents the load from rotating to its natural hang angle, allowing the operator to maintain the required orientation throughout the lift and placement.

Cold Storage and Outdoor Winter Applications

The 0°F (-18°C) low-temperature rating makes the TL6RH suitable for handling smooth, nonporous materials in cold storage facilities, walk-in freezers, and outdoor winter job sites. Always verify pad seal integrity with a test load before lifting in cold conditions.

Multi-Cup Coordinated Lifts

The pack-of-4 configuration supports multi-cup coordinated lifts for panels or objects exceeding the 70 lb single-cup rating. Multiple TL6RH cups can be positioned along a panel to distribute load, with each cup’s offset handle providing individual load orientation control at each attachment point.

Toolbox and Service Vehicle Carry

Field technicians across glazing, automotive glass, HVAC, and general construction use the TL6RH as a standard toolbox item — compact enough to carry at all times, capable enough to handle the majority of single-cup lifting tasks encountered on a typical service call. The pack-of-4 kit ensures a spare is always available when a pad needs replacement.

Compatible Materials

• Flat plate glass and float glass
• Tempered and laminated safety glass — smooth face
• Curved automotive glass (windshields, side glass, rear windows) — min. 12″ radius
• Smooth painted or primed automotive body panels
• Polished granite, marble, and engineered stone (flat and curved, within radius rating)
• Smooth painted or coated metal panels (flat and curved, within radius rating)
• Acrylic sheet and polycarbonate panels
• Smooth ceramic and porcelain tile
• Any smooth, nonporous flat or curved surface with min. 12″ (305 mm) radius

Not compatible with: rough, textured, or porous surfaces; surfaces with radius tighter than 12″ (305 mm); thin or fragile materials that could fracture under vacuum stress; surfaces contaminated with oil, wax, or debris in the pad contact area; concrete, brick, unpolished stone, wood, or drywall.

Product Documents

• TL6RH Instructions (PDF)
• TL6RH Troubleshooting Guide (PDF)

Application Instructions

Step 1: Surface and Material Assessment

1. Confirm the surface is smooth and nonporous — do not proceed on rough, textured, or porous surfaces.
2. For curved surfaces, confirm the radius is 12″ (305 mm) or greater.
3. Verify the panel or object weight does not exceed 70 lbs (32 kg) per cup.
4. Identify the planned attachment point — consider the object’s center of gravity and how the offset handle will control load orientation during the lift.

Step 2: Pad Inspection and Preparation

1. Inspect the TL6 suction pad for cuts, cracks, hardening, or contamination. Replace if damaged.
2. Clean the pad contact area on the work surface — remove dust, oil, wax, moisture, and debris.
3. In cold environments, verify pad flexibility above 0°F (-18°C) before use.

Step 3: Attaching the Cup

1. Position the pad flat against the surface with full perimeter contact, orienting the offset handle in the direction that will control the load’s intended lift angle.
2. Engage the vacuum mechanism using the aluminum handle/plunger until firm resistance is felt.
3. Check the red-line vacuum indicator — confirm full vacuum before lifting.
4. Apply a controlled test load (firm downward pull) to verify seal integrity before committing to the full lift.

Step 4: Lifting, Positioning, and Release

1. Lift smoothly — the offset handle will resist load swing and rotation; use this to maintain the intended load orientation throughout the lift.
2. Monitor the red-line indicator continuously throughout the lift and during positioning.
3. Do not exceed the 70 lb (32 kg) rated load capacity.
4. Lower the load fully to a stable surface before releasing the vacuum.
5. Engage the release mechanism slowly and in a controlled manner.
6. Clean the pad after use and store with the vacuum pad protector.

Technical Specifications

Specification	Details
Model	TL6RH
SKU	91320
Vendor	Wood’s Powr-Grip
Pack Quantity	4 units
Load Capacity	70 lbs [32 kg]
Pad Diameter	6″ [15 cm]
Pad Model	TL6
Rubber Type	Standard
Handle Type	Aluminum (offset, fixed)
Plunger Type	Industrial-Grade Plastic
Surface Texture Required	Smooth
Material Porosity Required	Nonporous
Allowable Surface Curvature	Flat or Curved
Minimum Radius for Curved Loads	12″ [305 mm]
Maximum Elevation	5,000 ft [1,500 m]
Operating Temperature Range	0°F to 120°F [-18°C to 49°C]
Vacuum Loss Indicator	Yes (red-line)
Includes	Vacuum pad protector

Safety Data Summary

Hazard Information

• Vacuum loss during a lift can result in sudden load drop, causing serious injury or property damage
• Overloading beyond 70 lbs (32 kg) rated capacity may cause sudden cup release without warning
• Use on surfaces with radius tighter than 12″ (305 mm) will prevent full pad seal and significantly increases drop risk
• Damaged or contaminated suction pads must be replaced before use
• In cold environments, verify pad flexibility and seal integrity before each lift — rubber performance approaches its limit at 0°F (-18°C)
• Do not use above 5,000 ft (1,500 m) elevation

Personal Protective Equipment

• Safety glasses or face shield when handling glass or sheet metal
• Cut-resistant gloves rated for glass and metal handling
• Steel-toed safety footwear
• Insulated gloves and appropriate cold-weather PPE when operating at or near 0°F (-18°C)

Safe Handling

• Orient the offset handle to control the intended load angle before lifting — the handle position determines how the load will be held during the lift
• Inspect the pad and clean the contact area before each lift
• Never exceed the rated 70 lb load capacity
• Monitor the red-line indicator continuously — lower the load immediately if vacuum loss is detected
• In cold environments, verify pad seal integrity with a test load before every lift
• Store with the vacuum pad protector to maintain pad condition between uses

Frequently Asked Questions

Q: What does the offset, fixed handle do and why does it matter?
A: The offset, fixed handle shifts the grip point away from the center of the pad, which prevents the attached load from swinging or rotating to its natural hang angle when lifted. This gives the operator direct control over the load’s orientation throughout the lift — critical when handling asymmetrical objects, panels with off-center weight distribution, or materials that must be held at a specific angle during installation. No other standard 6″ WPG hand cup offers this load-stabilizing handle geometry.

Q: How does the TL6RH (single cup, SKU 91320) differ from the TL6RH2B (matched pair, SKU 91345)?
A: Both use the same TL6RH model cup with the same 6″ TL6 pad, 70 lb capacity, and specifications. The TL6RH (SKU 91320) is sold as a pack of 4 individual cups with vacuum pad protectors — suited for single-cup use, multi-cup lifts, and toolbox carry. The TL6RH2B (SKU 91345) is a matched pair sold together with a carrying case, specifically configured for two-point ergonomic lifts on heavy awkward objects like water heaters. Choose the single-cup pack for general field use; choose the pair for dedicated two-point ergonomic lift applications.

Q: Can the TL6RH be used in cold environments?
A: Yes. The TL6RH is rated down to 0°F (-18°C), making it suitable for cold storage facilities, outdoor winter job sites, and refrigerated environments. Always verify pad flexibility and seal integrity with a test load before lifting in cold conditions.

Q: Is the TL6RH truly small enough to carry in a pocket or toolbox?
A: Yes — Wood’s Powr-Grip specifically notes this as a design intent. The compact form factor makes it practical for field technicians to carry as a standard tool alongside other hand tools, without requiring a dedicated case or bag. The vacuum pad protector keeps the pad clean during toolbox storage.

Q: What replacement pad does the TL6RH use?
A: The TL6RH uses the TL6 standard rubber pad (6″ diameter). Replacement pads are available separately through Wood’s Powr-Grip authorized distributors.

Q: Is this product made to order?
A: Yes. This product is made to order and all sales are final. Please confirm your surface type, curved surface radius, and load requirements before placing your order.

California Residents: ⚠️ WARNING: Cancer and/or Reproductive Harm — www.p65Warnings.ca.gov