FallTech 6512028VH Replacement Foot Bar, 29 in Hitch Base

Description

FallTech Davit System Parts

FallTech 6512028VH Replacement Foot Bar for 29 in Hitch-Mount Base

Factory replacement foot bar assembly for the FallTech 29 in vehicle hitch-mount davit base. The assembly includes the foot bar, T-junction, and pivoting feet with rubber pads, plus a 3 in detent pin for securing it to the vertical post.

Constructed with lightweight powder-coated 6061 aluminum and plated carbon steel, it restores stable ground contact to a hitch-mount base whose feet have been bent, worn, or lost.

29 inBase Compatibility6061Aluminum BuildPivotingRubber-Pad Feet3 inDetent Pin Incl.T-JunctionIncludedPowderCoated FinishPlatedCarbon SteelFactoryFallTech Part

Restore the Footprint of Your Hitch-Mount Davit

A vehicle hitch-mount davit base works because its foot bar plants the system against the ground while the hitch receiver holds the mast. When the feet or T-junction wear out, the fix is this complete factory assembly rather than an improvised repair on rescue equipment.

The pivoting feet with rubber pads conform to uneven pavement and protect finished surfaces, and the included 3 in detent pin secures the assembly to the vertical post without tools.

Key Features

Complete Assembly

Foot bar, T-junction, and pivoting feet with rubber pads arrive as one ready-to-install unit.

Fits the 29 in Base

Purpose-built for the FallTech 29 in vehicle hitch-mount davit base.

Pivoting Feet

Rubber-padded feet pivot to seat on uneven ground and protect finished surfaces.

Tool-Free Mounting

The included 3 in detent pin secures the assembly to the vertical post by hand.

Lightweight Build

Powder-coated 6061 aluminum keeps the assembly light without giving up durability.

Factory Replacement

Genuine FallTech part covered by the confined space davit hitch-mount manual.

⚠

Rescue equipment gets factory parts only. A davit base supporting an entrant is life safety equipment. Replace worn components with genuine FallTech assemblies and verify the complete base per the manual before the next entry.

Compliance Standards

OSHA 1910.146

Permit-required confined space programs depend on retrieval equipment maintained to manufacturer specification.

Manufacturer Maintenance

FallTech manuals require damaged components to be replaced with factory parts before returning equipment to service.

System Compatibility

Component of the FallTech vehicle hitch-mount davit base family; see the MCS31 manual.

OSHA 1926.502

Applies to the complete davit system this base supports in fall protection service.

Typical Applications

Utility fleetsRestoring hitch-mount davit bases on vault and manhole response trucks.Municipal crewsKeeping shared hitch-mount systems in service across departments.Worn feetReplacing bent bars or torn rubber pads found at inspection.Preventive stockKeeping a spare assembly so a failed inspection does not idle the truck.

How to Use

Follow the FallTech MCS31 instruction manual. The sequence below is an overview only.

1. Remove the old assembly. Pull the detent pin and slide the worn foot bar assembly off the vertical post.
2. Install the replacement. Slide the new T-junction onto the post and secure it with the included 3 in detent pin.
3. Verify the base. Level the system, confirm all four contact points seat firmly, and inspect the complete base before use.

Inspection and Retirement

Inspect with the hitch-mount base before each use following the MCS31 manual.

• Foot bar and T-junction: bends, cracks, and weld condition.
• Rubber pads: present, pliable, and not torn.
• Pivots: feet rotate freely and seat flat.
• Detent pin: locks positively and shows no deformation.

Retirement triggers: bent members, cracked welds, missing pads, or a detent pin that no longer locks. Replace the assembly; do not straighten or re-weld it.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

Type	Replacement foot bar assembly
SKU	6512028VH
Fits	FallTech 29 in vehicle hitch-mount davit base
Includes	Foot bar, T-junction, pivoting feet with rubber pads, 3 in detent pin
Materials	Powder-coated 6061 aluminum and plated carbon steel
Warranty	FallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

Which davit base does this foot bar fit?It fits the FallTech 29 in vehicle hitch-mount davit base. Confirm your base model in the MCS31 manual before ordering, and see the replacement sleeve product for the other wear component on hitch-mount bases.What is included in the assembly?FallTech includes the foot bar, the T-junction, pivoting feet with rubber pads, and a 3 in detent pin for securing the assembly to the vertical post.What is it made of?The assembly is constructed with lightweight powder-coated 6061 aluminum and plated carbon steel, matching the original equipment on the hitch-mount base.Do I need tools to install it?No. The assembly slides onto the vertical post and secures with the included 3 in detent pin by hand. Verify the pin locks positively before returning the base to service.Why do the feet pivot?Pivoting rubber-padded feet conform to sloped or uneven ground so the base seats on all contact points, and the pads protect finished floors and pavement.When should the foot bar be replaced?Replace it when inspection finds bent members, cracked welds, torn or missing rubber pads, or a pivot that binds. FallTech equipment must be repaired with factory parts, never straightened or re-welded in the field.Is the davit system safe to use while a part is worn?No. A hitch-mount base with damaged ground contact must come out of service until the assembly is replaced and the complete base passes inspection per the MCS31 manual.

FallTech 6512028VH Submittals and Documentation

MCS31 Hitch Mount Instruction Manual (PDF)Installation, use, and inspection procedures for vehicle hitch-mount davit bases and accessories. Confined Space Systems Brochure (PDF)FallTech confined space entry and retrieval davit system overview.

Keep Your Hitch-Mount System in Service

• FallTech 3pc Vehicle Hitch-Mount Base for Offset Davit Arms. The complete hitch-mount base this assembly services.
• FallTech Replacement Sleeve for Vehicle Hitch-Mount Bases. The other replaceable wear component for hitch-mount bases.

Servicing a Hitch-Mount Davit System?

The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.

Call 863-703-4522 to talk to a fall protection specialist.