Guardian 01205X SS18 Shock Absorbing Extension 18 in, 3-Pack

Description

Guardian Fall Protection

SS18 Shock Absorbing Extension Lanyard, 18 in, 3-Pack

The Guardian SS18 is the shortest member of the shock absorbing family: an 18 in extension that adds a compliant energy absorber between the dorsal D-ring and a connecting device that lacks one. It converts positioning gear and bare rope grabs into arrest-rated connections.

Compliant with OSHA 1926.502 and 1910.140 at 130 to 310 lbs including tools. Sold as a 3-pack.

130-310 lbs.Worker Capacity5,000 lbsTensile Strength4 lbsProduct WeightPolyester, steMaterialOSHA 1910.140ComplianceOSHA 1926.502ComplianceGuardianLifetime Warranty1 DayUsual Ship Time

Who Needs This Product

The SS18 lives on the back of the harness as the universal adapter of the connecting system: clip it to the dorsal D-ring, and whatever connects next, bare rope grab, trolley, or restraint hardware, gains an energy absorber. Crews that run bare 01508 grabs on VL58 rope buy these in threes.

Features

Manufactured from durable, 1” nylon webbing

Manufactured from durable, 1” nylon webbing

Clear cover around shock pack to protect against

Clear cover around shock pack to protect against the elements and allow for easy inspection

Snap hook on one end and D-ring on other end, fu

Snap hook on one end and D-ring on other end, functioning to replace harness dorsal D-ring

Jobsite-grade construction

Built with the materials and finish quality Guardian applies across its height safety line.

Documented compliance

Full manufacturer documentation is linked on this page for submittal packages.

Fleet-friendly inspection

Clear inspection criteria in the manual keep competent-person checks fast and consistent.

Technical Specifications

SKU	01205X-3PK
Worker capacity	130-310 lbs. including all clothing, tools, and equipment
Tensile strength	5,000 lbs
Materials	Polyester, steel
Product weight	4 lbs
Dimensions	12 in L x 8 in W x 2 in H
Standards	OSHA 1910.140, OSHA 1926.502, ANSI Z359.11-2013
Warranty	Guardian lifetime warranty against defects in material and workmanship

⚠

Account for the full system in your clearance. Total fall distance includes lanyard length, energy absorber deployment, harness stretch, and worker height below the D-ring. The anchorage must withstand 5,000 lbs or maintain a 2:1 safety factor. Never work with the harness D-ring above the anchor unless the application specifically permits it.

Compliance Standards

OSHA 1910.140

This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.

OSHA 1926.502

This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.

ANSI Z359.11-2013

This product is compliant with ANSI Z359.11-2013 when used as part of a complete, competent-person verified system.

ISO 17025 lab tested

Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.

Typical Applications

Residential roofingConnection between harness and anchor systems.Steel erectionTie-off to beam anchors and horizontal lifelines.ScaffoldingConnection to compliant scaffold anchor points.Concrete and rebarTie-off during forming and tying steel.Plant maintenanceGeneral fall arrest at tanks, racks, and platforms.Bridge maintenanceConnection to fixed and temporary anchors.Tower accessConnection during climbing transitions.Restraint systemsKeeping workers back from the leading edge, using full lanyard length.

Use Overview

Use must follow the Guardian lanyard instruction manual. The sequence below is an overview only.

1. Inspect first. Check webbing, stitching, energy absorber, and hooks before every use.
2. Connect the absorber end. Attach the energy absorbing end to the dorsal D-ring of the full body harness.
3. Connect the anchor end. Attach the free end to a compliant anchorage connector rated 5,000 lbs or engineered with a 2:1 safety factor.
4. Verify the gates. Confirm every hook gate is fully closed and locked, with no side loading.
5. Check clearance. Verify fall clearance below the work surface including free fall, deployment, and harness stretch.
6. Limit free fall. Position the anchor to keep free fall at 6 ft or less and minimize swing fall hazards.

Inspection and Retirement

Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the lanyard from service for any of the conditions below.

• Webbing: cuts, fraying, abrasion, burns, chemical damage, or UV fading.
• Stitching: broken, pulled, or abraded threads.
• Energy absorber: any deployment, torn cover, or elongation.
• Hooks: cracks, corrosion, deformation, or gates that do not close and lock automatically.
• Labels: missing or illegible.

Retirement triggers: any fall arrest event, any absorber deployment, or any condition where the inspector cannot positively verify the lanyard is fit for service.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Frequently Asked Questions

What does an 18 in shock extension do?It puts a compliant energy absorber between the harness dorsal D-ring and a device that has none, keeping arrest forces within the OSHA 1,800 lbs limit. Bare rope grabs are the classic pairing.Does it add to my fall clearance?Yes: add the 18 in length plus absorber deployment to the system math. Run the complete setup through the calculator on this page before work begins.Why a 3-pack?One per harness across a small crew, matching the bare grabs and lifelines fleets buy in multiples. Each extension inspects and retires on standard lanyard criteria.Which standards does this product meet?It is compliant with OSHA 1910.140, OSHA 1926.502, ANSI Z359.11-2013 when used within a complete, competent-person verified fall protection system, and Guardian products are tested in an ISO 17025 accredited laboratory.What is the rated capacity?The rated worker capacity is 130-310 lbs., including all clothing, tools, and equipment carried by the worker.When should this product be retired?Retire it after any fall event, any failed inspection item, or whenever an inspector cannot positively verify it is fit for service. The inspection criteria in the linked documentation define the pass-fail conditions.Is documentation available for submittal packages?Yes. The manufacturer documentation linked on this page covers installation, specifications, and compliance, and every file is hosted on our site for direct download into your submittal package.

Guardian 01205X SS18 Shock Absorbing Extension 18 in, 3-Pack Submittals and Documentation

Guardian 01205X Test Report (PDF)ISO 17025 accredited laboratory test results.Guardian 01205X Doc Of Conformity (PDF)Manufacturer declaration of conformity.Guardian 01205X Inspection Form (PDF)Printable competent-person inspection checklist.

Compatible and Related Products

• Guardian External Shock Absorbing Lanyard 2-Pack. The standard single leg family in 3 to 6 ft.
• Guardian 00455 Temper Roof Anchor 4-Pack. Reusable anchors for these connecting devices.
• Guardian 10733 Suspension Trauma Strap 4-Pack. Post-fall relief for every harness on the crew.

Outfitting a Crew with Connecting Devices?

Length, legs, and hook style follow from your anchors and clearance. Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.

Call 863-703-4522 to talk to a fall protection specialist.