Super Anchor Max-Force 6180 Energy Absorber 2-Pack

Description

Super Anchor Lanyards and Connectors

Super Anchor Max-Force 6180 Energy Absorber 2-Pack

The Super Anchor 6180 is an ANSI Z359.13 Max-Force energy absorber with a locking snaphook on the anchorage end and a web loop on the harness end. This listing is a 2-pack: two absorbers per order.

Sold as a 2-pack (two absorbers per order).

ANSI Z359.13CertifiedShock AbsorbingIn a FallMultipleConnectorsUltra-Liteand HD ModelsFall ArrestForce LimitingSnaphookor CarabinerDeploysOn ArrestCompactPack

Who Needs This Product

The Max-Force energy absorbers are shock-absorbing components for personal fall arrest. Choose the configuration that matches your connectors. Complete the system with a full-body harness and a rated anchor.

Features

ANSI Z359.13 certified

Meets the American National Standard for energy absorbers and lanyards.

Force limiting

Deploys in a fall to keep arrest forces within safe limits.

Many configurations

Standard, ultra-lite, and heavy-duty models with various end connectors.

Compact pack

A compact shock pack that mounts inline.

Durable

Built for daily jobsite use.

Connector choice

Snaphook, aluminum, or carabiner end options.

⚠

This is one component of a personal fall-arrest system. Confirm the required fall clearance for the deployed absorber before use. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

Fall arrestForce-limiting shock absorption.ConstructionEveryday fall arrest.IndustrialPlant and facility work.UtilityLine and tower work.

How to Use the Max-Force Energy Absorber

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	6180-2PK
Type	ANSI Z359.13 energy absorber
Function	Deploys to limit fall arrest force
Configurations	Snaphook to web loop; two absorbers per pack
Standards	ANSI Z359.13; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is an energy absorber?A shock-absorbing component that deploys in a fall to keep arrest forces within safe limits, certified to ANSI Z359.13. Staying inside the stated ratings and instructions supports a compliant, well maintained fall protection program. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.What configurations are available?One configuration, sold as a 2-pack: the 6180 with a locking snaphook on the anchorage end and a web loop on the harness end. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.What connectors are on the ends?A locking snaphook on the anchorage end and a web loop on the harness end. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.How much clearance does it need?Confirm the required fall clearance for the deployed absorber before use. See the Technical Specifications on this page for the exact materials, dimensions, and ratings. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.Is it certified?Yes, to ANSI Z359.13. Using the product within the limits described on this page helps keep your setup consistent with recognized fall protection practice. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.Do I need a harness?Yes. You also need a full-body harness and a rated anchor. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.Can it be used after a fall?No. Retire any energy absorber that has deployed or arrested a fall. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

Super Anchor Max-Force Energy Absorber Submittals and Documentation

Energy Absorber Instruction Manual 2025 (PDF)Use, installation, capacity, and inspection. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• Max-Force snaphook end energy absorbers
• Max-Force 6185 loop energy absorber 2-pack
• Ultra-Lite 6193 energy absorber 2-pack
• Super Anchor harnesses

Specifying Energy Absorbers?

Connector configuration and fall clearance affect the choice. Confirm your setup with us and we will help match the right Max-Force absorber.

Call 863-703-4522 to talk to a fall protection specialist.