Super Anchor Maxima Lifeline with Integral Rope Grab, 4087

Description

Super Anchor Lanyards and Connectors

Super Anchor Maxima 3-Strand Vertical Lifeline

The Super Anchor 4087 pairs the Maxima 5/8 inch three-strand lifeline and snaphook with a factory attached 4015-M integral adjuster rope grab, ready to connect out of the box in 25, 30, or 50 foot lengths.

Choose your length at checkout.

5/8 in3-Strand Rope25 to 100 ftLengthsSnaphookEndMaximaEconomicalRope GrabConfigsANSI Z359CompliantVerticalFall ArrestVersatileEveryday

Who Needs This Product

The Maxima lifeline is an economical three-strand vertical lifeline for fall arrest with a rope grab. Complete the system with a full-body harness, a compatible rope grab, and a rated anchor.

Features

Three-strand rope

Durable 5/8 inch three-strand rope.

Four lengths

25, 30, 50, and 100 foot.

Multiple configurations

Several end and rope-grab configurations.

Snaphook end

Locking snaphook connection at the anchor end.

Economical

A cost-effective everyday lifeline.

ANSI Z359

Meets the American National Standard for lifelines.

⚠

This is one component of a personal fall-arrest system. Use a compatible rope grab and energy-absorbing connector where required. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

RoofingVertical lifeline for fall arrest.ConstructionVertical access.MaintenanceWork at height on a lifeline.UtilityVertical positioning.

How to Use the Maxima Lifeline

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	4087-25M, 4087-30M, 4087-50M
Type	Maxima 3-strand vertical lifeline
Rope	5/8 in three-strand
Lengths	25, 30, 50, 100 ft
End	Locking snaphook
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the 4087?The Super Anchor 4087 pairs the Maxima 5/8 inch three-strand lifeline and snaphook with a factory attached 4015-M integral adjuster rope grab, ready to connect out of the box in 25, 30, or 50 foot lengths. Only trained workers should select, install, and use fall protection equipment for its intended application. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.For the 4087, what rope is used?5/8 inch three-strand rope. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Only trained workers should select, install, and use fall protection equipment for its intended application. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.For the 4087, what connects at the anchor end?A locking snaphook. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. If you have any doubt about the correct setup, consult a qualified person or the manufacturer instructions before putting the system into service. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.Do I need a rope grab?Yes, a compatible rope grab, plus a harness and rated anchor. Confirm each component in the system is compatible and rated for the intended use before connecting to it. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.Why choose the 4087 configuration?The 4087 saves buying and rigging a separate rope grab: the 4015-M integral adjuster arrives installed on the line and travels with you as you work. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.For the 4087, what standard does it meet?ANSI Z359 for lifelines. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Only trained workers should select, install, and use fall protection equipment for its intended application.What completes a system with the 4087?A complete personal fall arrest system pairs the 4087 lifeline with a full body harness, its factory attached integral adjuster rope grab, an energy absorber where the system design requires one, and a rated anchor. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Before every use, confirm you have adequate fall clearance below the work area.

Super Anchor Maxima Lifeline Submittals and Documentation

Lifeline Instruction Manual 2024 (PDF)Use, installation, capacity, and inspection. Maxima Lifeline Manual (PDF)Use, installation, capacity, and inspection. Reverse Rigging Manual (PDF)Use, installation, capacity, and inspection. Lifeline Buying Guide (PDF)Selection and configuration guide. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• Maxima 3-Strand Lifeline, Singles and 2-Packs
• Maxima Lifeline with SuperGrab, 4086 Series
• Maxima Lifeline with ValueGrab, 4085 Series
• Super Anchor harnesses

Specifying Vertical Lifelines?

Rope type, length, and rope grab affect the choice. Confirm your setup with us and we will help match the right lifeline.

Call 863-703-4522 to talk to a fall protection specialist.