Super Anchor Value Deluxe Fall Arrester Lifeline, 5502

Description

Super Anchor Lanyards and Connectors

Super Anchor Value Deluxe Fall Arrester Lifeline, 5502

The Super Anchor 5502 is the deluxe model of the Value fall arrester lifeline: a 5/8 inch three-strand line with a factory attached 6180 energy absorber and upgraded hardware, in 25 and 50 foot lengths.

Choose your length at checkout.

5/8 in3-Strand Rope25 and 50 ftLengthsIntegratedFall ArresterValueEconomicalRope GrabIncludedANSI Z359CompliantVerticalFall ArrestCompleteAssembly

Who Needs This Product

The Value FA lifeline is a complete vertical lifeline with an integrated fall arrester for workers who want a lifeline and rope grab in one assembly. Complete the system with a full-body harness and a rated anchor.

Features

Integrated fall arrester

A rope grab is included on the lifeline.

Two lengths

25 and 50 foot.

Standard and deluxe

Two configurations to match your needs.

Three-strand rope

Durable 5/8 inch three-strand rope.

Complete assembly

Lifeline and grab in one.

ANSI Z359

Meets the American National Standard for lifelines.

⚠

This is one component of a personal fall-arrest system. Confirm the fall arrester and lifeline match your harness and anchorage. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

RoofingComplete vertical fall arrest.ConstructionVertical access with a grab.MaintenanceWork at height.UtilityVertical positioning.

How to Use the Value FA Lifeline

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

1. Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
2. Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
3. Connect. Make the connection and confirm every gate is fully closed and locked.
4. Verify. Confirm the full system, capacity, and fall clearance.
5. Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

• Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
• Stitching: pulled, cut, or broken threads.
• Gates and locks: proper close and lock function.
• Fall indicators: any sign of deployment.
• Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	5502-25, 5502-50
Type	Value fall arrester vertical lifeline with grab
Rope	5/8 in three-strand
Lengths	25 ft, 50 ft
Grab	Integrated fall arrester
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the 5502?The Super Anchor 5502 is the deluxe model of the Value fall arrester lifeline: a 5/8 inch three-strand line with a factory attached 6180 energy absorber and upgraded hardware, in 25 and 50 foot lengths. Only trained workers should select, install, and use fall protection equipment for its intended application. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.For the 5502, what lengths are available?25 and 50 foot, in standard and deluxe configurations. Refer to the specification table above for full details on construction, finish, and sizing. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.For the 5502, do I need a separate rope grab?No, the fall arrester is integrated. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.Why choose the 5502 configuration?The 5502 steps up the hardware on the same assembled platform as the 5503, for crews that want the upgraded build without changing rope or absorber. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.For the 5502, what is the difference between the two configurations?The deluxe configuration adds a higher-end fall arrester over the standard. Following the manufacturer guidance on this page is part of keeping your equipment audit ready. Only trained workers should select, install, and use fall protection equipment for its intended application.For the 5502, what standard does it meet?ANSI Z359 for lifelines. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.What completes a system with the 5502?Yes, the assembly is reusable within its rated limits. Refer to the specification table above for full details on construction, finish, and sizing. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.

Super Anchor Value FA Lifeline Submittals and Documentation

Fall Arrester Lifeline Manual (PDF)Use, installation, capacity, and inspection. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

• Value Fall Arrester Vertical Lifeline
• Super Anchor harnesses

Specifying Fall Arrester Lifelines?

Length and configuration affect the choice. Confirm your setup with us and we will help match the right lifeline.

Call 863-703-4522 to talk to a fall protection specialist.