Tsunami Pure 10 Regenerative Air Dryer 40CFM (PNEUMATIC DRAIN)

Description

Product Description

This model includes Pneumatic Moisture Minder Drains & a one year warranty

The newest line to Tsunami Compressed Air Solutions, Pure-10 Regenerative Dryers provide the same high quality air as the Ultra Dryer line at a reduced cost. Pure-10 systems utilize a simple control system and 50 cfm Tsunami pre-filtration to assure removal of water, oil, and particulates before entering the dryer. The system is designed to achieve dew points down to -80°F and relative humidity down to .01% RH.

• 40CFM MAX DRYING
• 1/2 INLET / 1 OUTLET
• 120V POWER
• PNEUMATIC MOISTURE MINDER DRAIN
• 175PSI MAX
• 150F MAX TEMP
• 62LBS
• DIMENSIONS: 27″X21″X12″

Filtration

Tsunami filters are built for the unavoidable surges ordinary filters can’thandle. All units are machined from the highest quality materials &anodized inside & out to ensure long-lasting durability against trappedcontaminates. Filters and filtration packages are sequenced in thefollowing order:

STAGE 1: The Tsunami Water Separator removes water and up to 1 quartper minute & filters particulate down to 10 micron.STAGE 2: Oil Coalescing Filters removes oil aerosols down to .001 ppm &traps particulates down to .01 micron.STAGE 3: The Activated Carbon Filter removes oil vapor down to .003ppm, removing odor & taste from the air.

Drying

Tsunami Regenerative Air Dryers are designed to be compatible with anyspray foam rig. Our systems are built as complete packages & are wallmountableto eliminate wasted floor space used for bulky equipment.

Tsunami systems self-regenerate to ensure ultra clean, dry air.Approximately every two minutes, a controlled signal forces an internalpiston to shift. The shift in the piston redirects air flow through theopposite canister(s) while simultaneously back-flowing a small amountof dry air through the previously utilized tower; it’s like changing outdesiccant every two minutes!