FallTech 9pc Detent Pin Set for 5pc Davit System

Description

FallTech Confined Space

FallTech 9pc Detent Pin Set for 5pc Davit System

Set includes six 4″ pins plus one each 2″, 3″ and 3-1/2″ pins. .

9 pcDetent Pin Set4 inPin LengthPlated SteelConstruction5pc DavitSystem Fit

Who Needs This Product

Safety managers and crew leads keep factory replacement parts and accessories on hand so a worn pin, sheave, or bracket never takes a confined space system out of service. Using genuine FallTech parts keeps the system within its certification and warranty.

Features

Complete pin set

Includes six 4″ pins plus one each 2″, 3″, and 3-1/2″ pins so every connection point on the davit system stays covered.

Ball-detent locking

Each pin uses a spring-loaded ball detent that holds securely under vibration and releases with a simple push for fast assembly and teardown.

Direct-fit replacement

Sized specifically for the FallTech 5pc davit system, keeping worn or misplaced pins from sidelining the unit.

⚠

Genuine parts keep the certification. Substituting non-factory hardware voids the system certification and the FallTech warranty. Match the part number to your system model before ordering.

Compliance Standards

OSHA 1910.146

Permit-required confined space regulation that drives retrieval and rescue equipment requirements for entry work.

Typical Applications

Scheduled maintenancePlanned service of tripod and davit systems.Inspection findingsReplacing worn or lost hardware found during inspections.Spare kitsOutfitting spares for multi-crew operations.Downtime preventionKeeping systems in service instead of waiting on parts.

How to Use

Follow the FallTech instruction manual. The sequence below is an overview only.

1. Match the part. Confirm the part number fits your system model before ordering.
2. Install per the manual. Follow the FallTech manual for your system.
3. Log the change. Record the replacement in your equipment inspection log.

Inspection and Retirement

Inspect replacement parts on the same schedule as the parent system.

• Wear: check contact surfaces and moving parts before each use.
• Deformation: no bending, cracking, or elongation.
• Corrosion: no rust or pitting that affects function.

Replace any part that fails inspection, and re-verify the parent system before returning it to service.

Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

Type	Replacement Detent Pins
SKU	65105DP5
Detent Pins	Plated Carbon Steel; 4″, 3-1/2″, 3″, 2″
Warranty	FallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

Which systems does this part fit?The set covers every connection point on the FallTech 5pc davit system: six 4 inch pins plus one each 2 inch, 3 inch, and 3.5 inch pins. Each plated carbon steel pin uses a spring-loaded ball detent that holds under vibration and releases with a push for fast assembly and teardown.Is this a genuine FallTech part?Yes. It is a factory part, which keeps your system inside its certification and warranty. Aftermarket substitutes void both.When should this part be replaced?Replace it whenever a pre-use or annual inspection finds wear, deformation, corrosion, or lost hardware, and record the replacement in your equipment log.Do I need tools for installation?Installation follows the system manual and typically needs only basic hand tools. No special tooling is required.Can I stock spares for multiple crews?Yes. Many customers keep one spare per crew so a failed inspection never idles a system.What inspection does the part require?Inspect it on the same schedule as the parent system, before each use and at least annually by a competent person.Does using this part affect my warranty?No. Genuine FallTech replacement parts maintain the product warranty. The FallTech warranty covers defects in materials and workmanship for two years.

FallTech 65105DP5 Submittals and Documentation

65105DP5 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 65105DP5 Spec Sheet (PDF)Full specifications, features, and compliance summary for submittal packages.

Complete Your Confined Space System

• FallTech Confined Space Tripod, 6 to 11 ft Adjustable. The 6 to 11 ft adjustable tripod.
• FallTech Confined Space Tripod, 5 to 8 ft Adjustable. The compact 5 to 8 ft tripod.
• FallTech Confined Space Personnel Winch. Hand-crank personnel lifting with an automatic brake.
• FallTech DuraTech 3-Way SRL-R for Tripods. The standard tripod-mounted rescue SRL.

Specifying Confined Space Equipment for Your Crew?

The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.

Call 863-703-4522 to talk to a fall protection specialist.